Washing Drying Polishing Machine (YKC300)

Technical Specifications

• Basket Volume: 300 liters.
• Loading Capacity: Maximum 110 liters and 300 kg.
• Basket Material: Manufactured from perforated sheet metal, with 100-micron mesh wire stretched over the perforations.
• Dimensions: 1650x1400x2250 mm.
• Loading: Manual loading into the basket; unloading is done by tilting the basket mechanically.
• Dosage Pump: One dosage pump will be available for detergent or chemical.
• Washing and Rinsing: A 150-bar water jet is used for washing and rinsing.
• Water Consumption: 15 liters per minute. The supply must be suitable for this.
• Hot Water Option: Hot water up to 57°C can be provided; temperatures above 60°C can damage the pump.
• Drying: A 21 kW fan heater will be used for drying.
• Material: Parts in contact with water will be made of AISI 316 stainless steel, while other parts will be made of AISI 304 stainless steel.
• Air Requirement: 6 bar compressed air is required to operate the machine.
• Wastewater: pH control will be performed on wastewater.
• Total Installed Power: 31 kW.
• Exhaust Outlet: The machine will have an exhaust outlet for steam. It must be connected to the ventilation system or to the outside by the user.